NORS and Re-vulcanized Motor Mounts and Other Parts
Click any of the buttons below for additional photos and information - Note: Most of these links are PDF files
and require Adobe Acrobat Reader in order to open them. If you do not have Adobe Reader, Click  HERE.
   
 
 
 

New rubber formulated for vulcanizing is readied in
a" lab mill" (a roller-crusher), the precise quantity required is placed in the tooling, the tooling is
heated to 325. and then pressed under 20 to 40 tons onto your old  motor mount's carefully cleaned and straightened steel plates. A coat of paint and
they.re ready for 50 more years of service. Vulcanizing forces the rubber into the
crystal structure of the steel- the strongest, longest-lasting rubber to metal bond.

CLICK HERE to view a slideshow and complete description of the vulcanization process we use to rebuild your Motor Mounts

This web page designed,  hosted and maintained by MaritimeDragRacing.com® - All rights reserved
All original material is the property of Then and Now Automotive and/or Maritime Drag Racing® and may not be
reproduced in whole or in part without the express permission of the Then and Now Automotive and/or MaritimeDragracing.com®.
Site content, services and parts prices subject  to change without notice.