                      |
  
   |
1992 Chevrolet S-10 pro-street drag truck project vehicle. No time to finish or enjoy. Engine has complete rebuild, 350hp.
 Truck is completely tubbed. 27 inch frame width. Narrowed 13 inches over factory.
2 speed powerglide transmission,Narrowed 9 inch
Ford rear-end, "Strange" axles
Line lock, bucket seats, sun roof,
autometer gauges,
completely tubbed. Fuel cell
all new fuel and brake lines
all new brakes, 2.5 inch dual exhaust, H-pipe, flowmaster 50 series exhaust, shorty headers
custom drive shaft, tubbed box.
Rear cragar SS 15*10 wheels.
Asking $5500.00 O.B.O.
|
 New Eagle crank, Flat top pistons, Larger cam, complete rebuild, Weiand high rise aluminum intake,
600 cfm Holley carburator
 Phone 1-902-301-3745
email = benoitchris@hotmail.com
|
For Sale: 1974 Barracuda,408ci stroker,NaturallyAspirated,
2430lbs less driver,best run 8.92@150mph, $25,000......
1-506-586-0303
email = pjblack@hotmail.ca
|
 |
1992 S&W Dragster
210 inch hard tail dragster
New griffin radiator
K&R pro cube delay box
Hoosier tires 33-15-15
8-3/4 rear end with 4:30 gears
MSD 7AL3, B&M air shift, Painless wiring, New deist chute, Harwood scoop with air filter, G Force belts new April 2011.
19" cage Car was cert. July 2010 (IHRA)
We are the third owner
Being sold roller less motor and trans
Asking $7950.00
email dougforbes@rogers.com
506-474-0446
|
 |
1988 Chev S-10
Mild 350 - 440 horse
2 Speed Powerglide with trans Brake
Chev 12 Bolt Rear With 513 Gears
Anti Roll Bar On Rear
Dual Batteries
26" Front Tires
14x32 Rear tires
Multiple Event Winner
Runs 11.50-11.60 Consistently Depending On Air
Easy to Drive - Runs Straight
Asking $15,000 Turn Key
Would consider selling rolling
Mike - Work 506-387-7064
Home 506-382-1933
|
 |
1998 Undercover 4 Link Dragster For Sale
Upgraded to X Link in 2009
565 BBC 1000hp 23” Rollcage (can accommodate large driver)
BTE Powerglide & Converter
Strange Dual Brake System Complete K&R ModularWiring System new in 2011
K &R ThrottleStop and Delay Box Weld Wheels
Runs 4.60s in 1/8th : Should be 7.20s to 7.30s in ¼ easily
This is a well built well maintained car. I have owned it for 2 years and completely updated the car.
$25,000.00 US Turn Key
May consider selling as roller
Phone 207 726 4227
scott@sgeracecars.com
|
 |
SOLD!!!
 |
 |
1973 240Z Datsun Race Car For Sale. National event winner. Recent runner up in ProAm series in NED.
Car has full 2"x3" frame with roll cage tied to strut front end and ladder bar Dana rear end with new 4.30 pro gears. New Strange axles and Wilwood disc brakes. 14x33 MT on Weld wheels. Griffin Rad, MSD 7 & pro coil, Turbo Action shifter, New Holley fuel pump. Kirkey aluminum seat. Autometer gauges.
Motor is 468 BBC . Armstrong prepared shortblock with AFR heads. Holley Dominator. All the best parts in motor. (call for more details). Powerglide trans with ACD electric pro brake. 8" ATI converter. Dedenbear delay and throttle stop timer. ACD throttle stop.
|
 Car weighs 2275lbs race ready. Has run 8.84 at 154mph. Runs 9.90 at 148. Have spare trans and converter.Fuel pumps, distributer, coil. and more.
Will sell complete turn key with spares or rolling chassis only. Enclosed tri axle trailer available also if needed.
$8900 rolling and $19000 T/K with spares.
Serious inquires Email dwight@nb.sympatico.ca
|
For sale 1982 Z28 Camaro, 355 small block Chevy, GM bowtie heads, Wiseco piston, Scat rods, steel crank, complete roller engine with stud girdle, 350 turbo transmission with trans brake, 5500 stall Frank Lupo torque converter, B&M pro ratchet shifter, electric shifter and delay box, auto meter gages, 850 cfm Quick Fuel carb, Ford 9 inch rear end with 4.86 gears, Strange engineering center section, B&M line lock, 8 point roll bar, Best ET 10.59 @ 128 miles/hour. Also 24 ft Continental Cargo enclosed trailer (2007).
Please call Maurice St-Amand for any more information after 6pm, (506) 383-8216 or email: mauraman@nb.sympatico.ca
|
  |
For sale 1985 Capri rolling with 350 turbo trans. Car is all set up for sbc and I have off set motor mounts for sbc to fit and headers for car go with they are made to clear steering arm with sbc in vehicle all windows except front windsheild are lexan. Car has a B&M megashifter,6 point roll cage and was just painted at the end of august all control arms in back are boxed arms and has a ford 7.5 rear end full posi. This car has ran pro class for three years now and has always ran straight. I am asking 2000$ obo call (902)794-4616 or (902)549-2704 or (902)304-3061 or email @ brianwoodfine_16@hotmail.com
|
 |
2007 KCS Junior Dragster!
Chrome alloy chassis with a weight tank beneath the seat, billet aluminum front and rear wheels. Has an extended foot box with adjustable pedals that will fit a 6'3" driver and a one piece fiber glass body with removable decals. Has a 3.5 x 3 Craw's Racing alcohol motor with shockwave primary and secondary clutches. The motor has approximately 60 passes on it since it was last freshened. Comes with a starter and some spare parts. Is a 7.90 ET bracket car but will run faster. All for $6800.00!
|
 Phone 902-533-2612
email stevo_713@hotmail.com
|
1967 BUICK OPEL CADETT
**Updated Nov 4
FULL TUBE CHASSIS CAR, FIBERGLASS FRONT END, DOORS,HOOD,SCOOP. WAS NHRA CERTIFIED AND CAN BE EASILY REDONE, 2 NEW STRANGE STRUTS ON THE FRONT,KONI ADJUSTABLES ON THE REAR. COMPLETE MARK WILLIAMS REAR END WITH NEW GEARS(4.29), 4 LINK WITH WISHBONE, CHROMEMOLY DRIVESHAFT AND YOKES,4 WHEEL DISC BRAKES, PRO MOD STYLE WING,CHUTE, FUNNY CAR CAGE, WHEELIE BARS. THIS CAR ALSO JUST HAD A COMPLETE REWIRE FROM FRONT TO REAR. A-100 FUEL PUMP, 4 PORT RETURN REGULATOR, PLUMBED AND WIRED WITH TIMING RETARD FOR A 250 BIG SHOT NITROUS KIT(NEVER SPRAYED)WITH PURGE. MOROSO ACCUMULATOR WITH ELECTRIC VALVE, ELECTRIC WATER PUMP, DUAL FANS, FRONT MOUNTED FUEL CELLS.
CURRENTLY SET UP FOR A BBC AND A GLIDE.
CURRENT ENGINE IS A 598 CU PUMP GAS ENGINE THAT DYNOED OVER 800 HP AND HAS FOLLOWING PARTS
DART BIG M BLOCK, 10.5 TO 1 PISTONS, EAGLE CRANK & RODS, DART PRO 1 345'S CNC PORTED BY ARMSTRONGS THAT FLOW OVER 400 CFM, JESEL BELT DRIVE, JESEL SHAFT ROCKERS, DART INTAKE, 1250 DOMINATOR CARB.
TRANS IS A POWERGLIDE THAT WAS FRESHENED 15 PASSES AGO WITH HARDENED INPUT SHAFT WITH A NEW ATI CONVERTOR THAT HAS 15 PASSES ON IT AS WELL.ALSO HAS AN ULTRABELL AS WELL AS A AFTERMARKET TAIL HOUSING AS WELL.
INTERIOR WILL ACCOMODATE A 200 LB TALLER DRIVER AS WELL,
|
  THIS CAR WAS ALL NEW THIS YEAR AND HAS THE BEST PARTS MONEY CAN BUY. A VERY NEAT AND TIDY RIDE AND A DEFINATE ATTENTION GETTER. PRICE REDUCED TO $24,995** TRADES CONSIDERED
ALL NEW WIRING, AS WELL AS A NEW FIRE SUPPRESSION SYSTEM, PAINLESS 9 SWITCH CIRCUIT PANEL, ALL GAUGES, DELAY BOX, 7AL-3 IGNITION SYSTEM.
FASTEST 8.72 @ 156 WILL CONSIDER TRADES
WILL SEPARATE AND SELL AS ROLLER PRICE IS FLEXIBLE!
email = BETTERSERVICEINS@BWR.eastlink.ca
PhoneNumber = 902-543-0485
|
11990 LX Mustang Pump Gas 383 Stroker, Eagle 4340 Rotating Assembly,
(New 227 AFR Heads,) All CNN&PORTED Super Victor Intake, Crower Cam, Lifters,
Roller Rockers, Pro fuels 750 Carb.
Powerglide with Ultrabell & TCI Pro Tree Trans Brake & 1.76 Low Gear 9" Ford Rear End
with 4.56's and Full Spool,
QA-1 Coil Over Shocks, 4 Link Suspension. Tubular Front End, with Tubular Lower Control Arms & Coil Overs,Aerospace Front Brakes, Griffin Rad with Electric Fan, CSI Electric Water Pump Hurst Pistol Grip Shifter,2 Seats, Dedenbear Delay Box, 2 Step, Full Cage. This engine has less than 50 passes on it, and is race ready.
For more information or pictures, feel free to email at anytime
Shortlegs41@hotmail.com
902-403-3872
|
  Asking $15,000
Phone 902-402-3435
email shortlegs41@hotmail.com
|
1968 Chevelle Pro Touring
Big Block Chevy, TH400 trans, All aftermarket suspension - Dana 60 rear, tubular control arms up front, way too much to list - body, interior and frame are mint. Runs 11s easy in the 1/4 mile and handles like a Corvette on the street. For more information phone Chris MacDonald
902-736-1303
|
 |
1974 Vega altered wheel base, 9 inch ford, strange nodular center, strange axles, ATI proglide and ATI converter, three races on rear tires, Wilwood brakes and spindles, KH disc brakes rear, ProBandit / electric shift,All new in 2010 ,new MSD 7AL, soft-touch, burnout control, new playback tack, Kirky seat and new belts,Biondo 450 delay box,Dendenbear throttle stop.Armstrong power,sbc 355, dyno 628hp ,185 recorded runs with this set up,car weighs 2800lbs with driver,best pass 9.78 at 140mph.
|
 Car has a long history of running straight and being competitive, runner up at IHRA national last spring,qts at Charlotte 4 wide last season,Good 10.90 car $24,000.T/K
Phone 506-866-3834
|
1960 Ford Econoline Wheelstander, 427 BBC injected alcohol. Engine is fresh. New tires, many new parts. Truck is in flat black. Could be converted to a regular race truck with little work. Will sell turn-key only. Asking $24,000
Contact Rick at 506-866-3834
|
 |
1986 Chevy S-10 with a Strange Axles and spool 513 12 bolt chevy,Wilwood brakes front and rear,14 32X15 M/T tires on rear-Moroso on front. All auto meters gauges in truck,Dedenbear Delay box,and electric shifter,and MSD system. Two race seats with harnesses. Strange Dryshaft and ceramic coated headers. Wilwood wheels on truck front ones new. Moroso oil accumulator,Mallory Super-Duty Fuel regulator,Aeromotive A2000 Fuel Pump,new QA1 adjustable front shocks, rear shocks with new springs also adjustable.Truck has ability to Run 9.50s in 1/4mile.
|
 Asking $12,000 Rolling or Best offer. Also selling a pit truck with a Honda 6.5 HP motor, will trade for junior dragster. Email for a picture.
Call Mike. 506-738-2540
or email
|
1993 Camaro Z28, Street/strip, Procharged 350 with approx. 550 horsepower, 700 R4 Transmission 12 Bolt rear, 3.90 gears with powertrax locker, Disk brakes all around, Prostar wheels all around, autometer guages, 6 point cage, fuel cell, electric fuel pump, 3" mandrel bent stainless exhaust into two flowmasters, Hasn't been licensed or inspected since 1999, been garage kept since, car was in miramichi in 1998 and went 10.90's, great shape outside, inside, and underneath.
 |
 Awesome car! in storage right now, can store for winter if need be, Asking $13,500, Call Peter Hobart for anymore information.
Home - 506-757-2599 (after 7pm)
Cell - 506-645-8775
Office - 506-738-8481
|
1965 Valiant two door post original Regina car, dog dish hub caps, 1968 340 block, steel crank, and 4 brl intake Auto transmission and tork and mostly all part for the car. Very re-storable or would make a great drag car. very light weight $2500.00 located on PEI
Phone 902-853-7521
859-2304
email wendall65@hotmail.com
 |
  |
FOR SALE 1979 Pinto, street, strip or show. Full roller 306, Canfield 195 heads, custom cam, C4, 3800 stall, 8" rear with 3.80 gears.
 |
 All new interior. Pink Panther paint. New baby, and no backseat! so I don't get to enjoy it. Too many new parts to mention. Sell or trade for antique Ford / Mercury of similar value. Ph 902-961-2016 after 7pm or leave msg. email: addict76@gmail.com
|
1984 Camaro
410 small block chevy, 11.50 compression, iron eagle heads, tunnel ram, 4000 stall, turbo 350, 391 gears with an 8.75 chrysler rear end. Will trade for boat or bike or whatever call weekday after 5
Phone 902-549-6446
Email ronferguson@live.com
|
 |
For Sale 1980 Monza (Street Legal) Full Roller 350 C.I. (10.5-1) Holley Dominator Intake Dart Iron Eagle Heads- 2.05 in.& 2.02 ex.
Turbo 350 Trans.with 3000 stall converter Narrowed 12 Bolt Posi.with 4:88's and Bears Axles, 15x14x31 Street Legal tires, 10 point roll cage with full interior, Too many parts to mention
Serious Inquiries Only Please
Call Shawn at 902-740-4099
|
 |
1973 Pro-Street Chevy Nova SS, 540 ci, 875 HP, 9.24@147MPH... Race Built Th400, Transbrake and delay box.. Dana 60 On ladderbar suspension... front coilover suspension... Best of everything, many extra parts included in sale, would consider trade... Call Curry Custom'z 506-523-9006
 |
 |
1991 Mustang LX notchback
black on black, 6 point roll cage
painless wiring kit and switch panel, B&M Ratchet shifter,
Autometer gauges, Harwood 6" extended hood
Harwood fibergalss trunk,
QA1 tubular k member and a-arms, QA1 coil-overs, 12 way adjustable, Flaming River rack, 8.8 rear end with spool and 4:10 gears, upper and lower control arms, mini tubbed
drag lights front and rear
15x10 in the rear
with 325/50/15 drag radials
competition engineering rear coil overs 3 way adjustable
a1000 airmotive fuel pump with -10 in and out
braided line front to back
10 gallon fuel cell in rear
battery relocated to truck with a shut off switch
drivetrain:
500 hp 350 chev virgin block
11.5:1 compression
victor jr heads
harland sharp roller rockers
arp heat stud kit
roller rocker stud girdle
super victor intake
barry grant gold claw carb.
msd billet distributor
msd 6al box, electric water pump, griffin aluminum radiator, Stand alone fuel system for nitrous
NOS big shot 125-325 hp
|
  car has run 11:20's on the motor and 10:20's on the bottle with a 175 shot
please call 506-476-6118 for more details/information
|
I have an awesome looking race truck that is up for sale or maybe trade for old muscle car or something of interest.
I bought the truck brand new , it has 30,000 kms on it before i started the build. The truck is a 2002 GMC Sonoma ext Cab 2 wheel drive.
Body Mods : Front Envoy Bumper, East coast customs ground effect kit and roll pan molded into the body, Check mate flush mount Tongue cover, W-6 Ram air hood and the custom Tribal Ghost Flames.
Inside Mods : Custom Roll cage ( There is more cage in the truck then whats in the pic ), Auto Meter Gauges, two wrap around seats and full interior B&M Shifter.
Front suspension Mods : Spindles and springs ( Bell tech lowering kit ) I have stock spindles ( may have stock springs ), Weld Pro star wheels 15x4 with New Good Year Front Runners( i think they are 25 high or 26 high.
Rear Section : 2x4 custom frame narrowed ( 24" outside to outside rail ), Competition Engineering coil over kit, Competition Engineering ladder bar kit, Competition Engineering pan hard bar, Ford 8.8 rearend housing with big ford bearing ends, Strange Pro Race Axles 31 spline ( driller for chev wheels ), 1/2' wheel studs, Full Strange spool, T&A Rearend cover, Your choise of rearend gears ( 465, 488, or 513 ),
5-Gallon Fuel Cell with Foam, 13'' x 13'' x 8'', Fittings and steel braided lines, Sealed Battery box and Aeromotive fuel pump and filter ( good to 750 hp ), Weld Pro Star Wheels 15x14 wide ( slicks thats on them are junk, just on for mock up ).
This is what i could remember. I could have missed some stuff along the way.
There is a lot of time and money invested into this truck to make it look the way it does. If someone wants a head turner and a cool looking race truck this is you chance.
|
   I do have some other parts that will go with the truck.
I also have motor parts that can be sold with the truck if the money is right
Please don't waste my time, Serious Inquiries Only Thank you
Ron 902 219 8513 ( c ) or 902 492 7277 ( h )
|
Home made alcohol junior dragster with Roach built blockzila engine and polar clutch system that comes with different weights and gears for adjustment.Car runs 10.04 and has everything to go with it fire jacket, helmet, starter, selling for the price of the motor asking $3000.00.
506 738 8926 or email dragracing644@hotmail.com.
|
 |
1968 Camaro SS ProStreet/Drag Car. Registered 1968 Camaro SS 396/350 H.P. Engine built by P.A. Performance, fresh 2009 (32 passes) 496 cu. in. – 832 H.P. 704 lbs tq, GM-4 bolt block, Scat Crank & Rods. SRP pistons, comp 7/4 swapcam, Jesel belt drive, new comp roller lifters(32 passes) comp pro magnum rockers, crane stud girdle, Profiler Int., Holley 1050 carb, K&N air filter, HVH Carb spacer, MSD Digital 6 box, MSD Distributor. Hooker Super Comp Ceramic Coated (Factory) 2” headers, (new 20 passes), set of same 2 1/8 in. go with car, CVR mini starter, Griffin alum rad., electric fan, new CSI water pump. Transmission turbo 400 (32 passes) Hipster transbrake, manual reverse shift , TCI shield, TCI deep pan, coan 8” (6200) converter (32 passes), JW ultra bell (new 2008). Rearend , ladder bar, Ford 9”, all Strange best parts (new 2008), Strange Pro Iron Center Section, lightened spool, big bearings, Dayton alum. Support, Richmond pro 4:57 gears (large bearing), lightened spool, 40 Spline axles, all less than 100 passes, all built and assembled by Strange. Brakes front Wilwood discs, rear Ford racing discs with “parking brake”.
|
 Fuel system BG 400 pump & filter, holley regulator, all braided stainless lines (back to front). Weld fronts 15x5, M/T front runners, Weld rear 32x14x15 M/T slicks with (12 passes). Comp. Eng. Pro wheelie bars. Presently on car fiberglass doors, bumpers, trunk lid & spoiler.
Also included are fully dressed steel doors, chrome bumpers, steel trunk lid with spoiler and original front seats, M/T Sportsman Street tires mounted on Weld 15x12 rims.
2000 Pace 24 ft. trailer, cupboards, tool box & mattress go with car. Serious inquiries only, may consider partial trades, i.e. muscle car (GM) racecar, motorcycle. Can provide more details. Phone 506- 386-1544
|
200" Super Comp Dragster. Rolling Chassis. tranny and motor available. $9,500
250" Top Dragster. Dan Page built car. Not Painted, has a powder coated frame (red). Car has never been finished. Strange housing. Mark Williams aluminum 9" Ford spool&axles. 4.10 ratio. Carbon fiber wing, seat and dash. Ron Davis rad. Has shorty glide with 9" converter with a mild 468 Chev. B&M shifter. Charging system. Over $30,000 invested in this car. Asking $25,000 OBO
Contact Chris ANYTIME at 506-466-8155 or 506-466-5085 or by email cdlord@live.co
|
  |
1989 Dodge Daytona Rolling Chassis
Tube chassis, 4 link, Dana60 Centerline, Hoosier,Wilwood,
BG400,Diest,Hurst,MSD7AL3,
Painless, Dedenbear,
Autometer, Fiberglass
(Front clip, doors, hatch, rear panel)...$13,000
2006 United UV 823 Enclosed Car Hauler
23ft V front, finished interior, loading and interior lites, 48 inch side door....$7,500
Call Jean (506)381-4415...After 6pm..or weekend
|
 |
1983 Suzuki Katana Drag Bike. This bike has been a prominent figure on the
Atlantic Drag Racing scene for many years. It has made countless 8-second blasts down the quarter mile, staying straight and upright every time. It has claimed numerous track and ADRA championships, and always looks great.The bike will be sold as a rolling chassis, but includes all the electronics,
air shifter, and Vance & Hines pipe. Just a motor and carbs to go racing.
$5000.00 OBO
Contact: Nevin Scott (902)940-5768 nabs1978@hotmail.com
|
 |
1970 1/2 RS CAMARO "Z/28" CHASSIS..BACK-HALF set up for BB Chev..12 PT CAGE...ALL METAL--ROLL UP WINDOWS...CARPETED..
LARGE TUBS---Fiberglass "BOLT-ON" Hood with 6" OUTLAW COWL SCOOP...
This Chassis can be used for RACE or PRO STREET
Comes with a 9" Rear with STRANGE AXLES.."PRO 4-LINK" with Diagonal Bar & QA-1 ALUMINUM Double Adjustable COIL-OVERS. Front Suspension has Moroso Coil Springs & Adjustable Shocks. All STRANGE Third Member 4.30/Spool.
SET up for BB Chev....
Currently CERTIFIED to 8.50
Here are the items you will need to get it ready to race or drive...headers..rad...fuel system
Car is STREETABLE !
BODY & PAINT are in "EXCELLENT" CONDITION..."HUGGER ORANGE"
$13950. or Reasonble Offer.
|
 PhoneNumber = 519-647-3102 or 647-2568email = murrayedward@rogers.com
TRADE VALUE is $15500.
WILL CONSIDER TRADES for for Dragster (NO Hardtails) or Bracket Race Car or Street Muscle Car...OR Trailer + I WANT CASH DIFFERENCE
I HAVE "MORE" PIC's !
WILLING to DELIVER PART WAY...for COST of Fuel/Room
 |
1988 Camaro Legal Super Stock GT and
2005 Hallmark 28' Car Trailer
TRAILER - has 5 alloy spoked wheels, checker plate flooring with Allumium Tred Plate runners and tail gate, custom made birch cupboards and counter, 7800 watt generator, 120 volt wiring, and AM/FM radio.
CAR - 350 small block chev dyno sheets available putting out over 620 horse power, #441 heads machined by the late, Bruce McDowell, steel crank shaft, Lunati cam shaft, BME pistons prepped by Patterson, Davis headers, Cheetah air shifter, MSD trigger - RPM switch -Billet distributor - 7 AL box - timing retard - 2 step, !
|
 Front end by Ed Quay, Rear End and 4 Link Suspension by S&W, Ford 9 in rear Housing 5:83 gears, 3 speed transmission by Shepps Transmission, Moly drive shaft, Koni adjustable front shocks, QA1 Adjustable rear coil overs, Bear wheelie bars, Weld drag lites front and back, New Hoosier front runners, 2 sets of Phoenix radial rear tires, lots of spare parts. MAKE ME AN OFFER - YOU KNOW MY CAR YOU KNOW IT'S PERFORMANCE AND CONSISTANCY
Phone 506-536-3611 or email blairlyn@nb.aibn.com
SERIOUS OFFERS!!!!!!!!!!
|
1963 Plymouth Belvedere Max Wedge Clone Very clean and highly detailed car that will turn heads at any local car show, cruise night or drag race. The sight and sound of this car draws attention where ever it goes. People can not believe it only has a little .509 Hydraulic cam. If you do not want attention and having to answer a lot of questions than this car is not for you. Engine: -1968 440 with less than 1000 miles on fresh rebuild -steel crank(10/10),ARP main studs -Milodon oil pan and pickup -Melling HV oil pump -System 1 reusable oil filter -reworked LY rods with ARP bolts -TRW 10.5 pistons -.509 hydraulic purple shaft(no maintenance) -Edelbrock aluminum heads CNC’d machined hand blended by Modern Cylinder Heads in Michigan.
|
 Heads had the Edelbrock lettering removed and painted factory color so they look stock. -Edelbrock Performer RPM intake -Holley 850 dp (brand new) -Mopar Performance electronic distributor -MSD 6A ignition box -
Headman headers
Email: hemi331@rogers.com Phone: (519)893-3805
|
